Thermo Scientific Applied Biosystems QuantStudio User Manual page 99

QuantStudio ™ 3D Digital PCR System User Guide
3. Choose the appropriate option:
If connecting your instrument to a...
Wired network that supports DHCP
• Wireless network
• Wired network with specific
requirements (such as static IP
operation)
4. In the Instrument Settings screen, touch Network Setup, then touch Edit in the
network setup screen.
5. (Wireless connection only) If you are connecting your instrument to a wireless
network:
a. In the Network Setup screen, touch Change Connection Type.
b. In the Choose Connection Type screen, touch Wireless
c. In the Available Wireless Network screen, touch the desired wireless
hotspot.
Note: The signal strength of a wireless hotspot is indicated by the number
of bars present in the wireless icon (
indicates that the hotspot is secure (WPA, WEP, or WPA2).
Appendix D Networking
Connect the instrument to the network
Action
Network setup is complete.
™
Note: The QuantStudio
is pre-configured for DHCP operation
and automatically joins the network
when connected.
Go to step 4.
.
). The presence of a lock icon ( )
D
3D Instrument
99