Thermo Scientific Applied Biosystems QuantStudio User Manual page 100

Appendix D Networking
D
Connect the instrument to the network
100
d. If your selected wireless hotspot is secure, enter the required authentication
information (user name/password), then touch OK.
If connecting your instrument to a network that supports DHCP, network setup is
complete. Otherwise, go to the next step to configure the TCP/IP settings for the
instrument.
6. Set the internet protocol (TCP/IP) properties for the QuantStudio
Instrument:
a. In the Network Setup screen, touch Edit Settings.
b. In the Network Setup settings, touch the IP Configuration field, touch the
setting appropriate for your network (Static IP or DHCP), then touch OK.
• DHCP – Select to allow your network DHCP server to automatically
assign an IP address to the instrument.
• Static IP – Select if you have a static IP address to assign to the
instrument.
QuantStudio ™ 3D Digital PCR System User Guide
™
3D