Image the
chips
QuantStudio
™
3D Digital PCR System User Guide
Note: Whichever destination you select, imaging data is also saved on the
instrument, up to a limit of ~600 experiment files, after which the oldest files will
be purged from memory and replaced with newer files.
IMPORTANT! Before imaging, confirm that the latest firmware is installed on the
™
QuantStudio
3D Digital PCR Instrument.
Note: If you are unsure of the firmware version, see "Check the instrument firmware"
on page 87.
1. If you selected USB in the Data Destinations screen (as described above), insert
a USB device into the USB port on the front of the instrument.
The touchscreen displays the USB drive icon (
Instrument has mounted the drive.
Chapter 5 Image and analyze the chips
) when the QuantStudio
5
Chip imaging
™
3D
43