Thermo Scientific Applied Biosystems QuantStudio User Manual page 67

QuantStudio ™ 3D Digital PCR System User Guide
11. In the Network Complete screen, touch OK.
12. In the Configuration screen, touch Edit to change the instrument settings.
13. In the Edit Configuration screen, modify the fields as needed, then touch Save.
• Touch the Instrument Name field, enter up to a 16-character name for the
instrument, then touch
IMPORTANT! The instrument name is an alphanumeric string used to
identify the instrument on the network. The instrument name:
· Can be up to 16 characters long.
·
Must consist of alphabetic and numeric characters.
·
Can contain hyphens, but not as the first or last characters in the name.
·
Cannot include spaces or special characters ( ; : " < > * + = \ | ? , ).
Note: By default, the Instrument Name is set as the serial number of the
instrument.
• Touch the Time Zone field, then select the correct continent and region
from the list.
• Touch the Date field, enter the current date, then touch Enter.
• Touch the Time field, enter the appropriate time units, then touch Enter.
14. In the Configuration screen, touch OK to accept the instrument configuration.
™
The QuantStudio
the Start Run screen.
Appendix A Install the QuantStudio
Install the QuantStudio
to save the setting.
3D Instrument is ready to use when the touchscreen displays
™ 3D Digital PCR System
™
3D Digital PCR Instrument
A
67