Thermo Scientific Applied Biosystems QuantStudio User Manual page 102

Appendix D Networking
D
Connect the instrument to the network
102
e. Touch
, then configure the Windows Internet Naming Service (WINS)
settings:
• Windows Domain – Enter the domain name of the WINS server.
• WINS Server – Enter the IP addresses for the primary (top) and
secondary (bottom) WINS servers.
IMPORTANT! WINS may be required if you specify a file server as a data
destination.
Note: During operation, the instrument attempts to resolve WINS names to
IP addresses using the server specified in the top-most field. If unavailable,
the instrument uses the server specified in the bottom-most field.
f. When you are finished configuring your network settings, touch OK.
The touchscreen displays "Network Complete" when the instrument
successfully connects to the network.
7. In the Network Complete screen, touch OK, then touch
Menu.
After the instrument has successfully connected to the network, the Network
Setup screen displays the details of the network connection.
to return to the Main
QuantStudio ™ 3D Digital PCR System User Guide