Thermo Scientific Applied Biosystems QuantStudio User Manual page 101

QuantStudio ™ 3D Digital PCR System User Guide
c. If you elected to assign a static IP to the instrument, touch the following
fields and enter the:
• IP Address—Enter the static IP address for the instrument.
• Netmask—Enter a subnet mask for the network if applicable.
• Gateway—Enter a default gateway for the network if applicable.
Note: For each setting, touch the associated field, then enter the setting
using the keypad and touch Enter to accept the value.
d. Touch
, then configure the domain name service (DNS) settings:
• DNS Domain – Enter the domain name of the DNS server that you
want the instrument to use.
• DNS Server – Enter the IP addresses for the primary (top) and
secondary (bottom) DNS servers.
IMPORTANT! DNS settings are required if you:
· Specify the Connect cloud-based platform as a data destination (for your
™
QuantStudio 3D AnalysisSuite
·
Want to use Network Time Protocol (NTP) for instrument date/time
synchronization.
Appendix D Networking
Connect the instrument to the network
™
Software projects).
D
101