Thermo Scientific Applied Biosystems QuantStudio User Manual page 66

Appendix A Install the QuantStudio
A
Install the QuantStudio
66
™ 3D Digital PCR System
™
3D Digital PCR Instrument
Connection
Wireless
None (no network
connection)
The instrument is connected to the network when the touchscreen displays the
Network Complete screen.
1. Touch
Wireless.
2. In the Available Wireless Network screen, touch the
desired wireless hotspot.
Note: The signal strength of a wireless hotspot is
indicated by the number of bars present in the wireless
icon ( ). The presence of a lock icon ( ) indicates that
the hotspot is secure (WPA, WEP, or WPA2).
3. If your selected wireless hotspot is secure, enter the
required authentication information (user
name/password), then touch OK.
Offline to configure the instrument to save data to a
local USB drive.
QuantStudio
Action
™ 3D Digital PCR System User Guide