Contour Call - Cycle62; Path Milling - Cycle72 - Siemens SINUMERIK 840D sl Programming Manual

18.1.26

Contour call - CYCLE62

Programming
CYCLE62(STRING[140] _KNAME, INT _TYPE, STRING[32] _LAB1, STRING[32]
_LAB2)
Parameters
No. Param Param
mask internal
1 PRG/ _KNAME
CON
2 _TYPE
LAB1 _LAB1
3
4 LAB2 _LAB2
18.1.27

Path milling - CYCLE72

Programming
CYCLE72(STRING[141] _KNAME, REAL _RTP, REAL _RFP, REAL _SDIS, REAL
_DP, REAL _MID, REAL _FAL, REAL _FALD, REAL _FFP1, REAL _FFD, INT
_VARI, INT _RL, INT _AS1, REAL __LP1, REAL _FF3, INT _AS2, REAL
_LP2, INT _UMODE, REAL _FS, REAL _ZFS, INT _GMODE, INT _DMODE, INT
_AMODE)
Parameters
No. Param Param
mask internal
1 _KNAME
2 RP _RTP
3 Z0 _RFP
4 SC _SDIS
5 Z1 _DP
DZ _MID
6
7 UXY _FAL
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Explanation
Contour name or subprogram name does not have to be programmed in
_TYPE = 2
Determination of contour input
0 = Subprogram
1 = Contour name
2 = Labels
3 = Labels in the subprogram
Label 1, start of contour
Label 2, end of contour
Explanation
Name of the contour subprogram
Retraction plane (abs)
Reference point of tool axis (abs)
Safety clearance (to be added to reference point, enter without sign)
End point, final depth (abs/inc), see _AMODE
Maximum depth infeed (inc; enter without sign)
Finishing allowance, plane (inc), allowance at edge contour
Programming cycles externally
18.1 Technology cycles
685