Specify Wear And Setup Values ($Tc_Scpxy[T,D], $Tc_Ecpxy[T,D]) - Siemens SINUMERIK 840D sl Programming Manual

Example
The same cutting edge is used for two bearing seats:
Program code
N110 T7 D7
N120 G0 X10 Z1
N130 G1 Z-6
N140 G0 DL=2 Z-14
N150 G1 Z-21
N160 G0 X200 Z200
...
9.2.2

Specify wear and setup values ($TC_SCPxy[t,d], $TC_ECPxy[t,d])

Function
Wear and setting-up values can be read and written to using system variables. The logic is
based on the logic of the corresponding system variables for tools and tool noses.
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Comment
; The revolver is positioned to location 7. D7 and DL=1
are activated and moved through in the next block.
; DL=2 is activated in addition to D7 and is moved
through in the next block.
; Approach tool change position.
Tool offsets
9.2 Additive offsets
389