Siemens SINUMERIK 840D sl Programming Manual page 479

10.9 Repositioning to the contour (REPOSA, REPOSL, REPOSQ, REPOSQA, REPOSH, REPOSHA, DISR, DISPR, RMIB
Example: Approach in circle quadrant, REPOSQ, REPOSQA
The tool approaches the repositioning point along a quadrant with a radius of
control automatically calculates the necessary intermediate point between the start and
repositioning point.
Example:
REPOSQ RMIBL DISR=10 F400
Example: Approach tool in a semicircle, REPOSH, REPOSHA
The tool approaches the repositioning point along a semi-circle with a diameter of
The control automatically calculates the necessary intermediate point between the start and
repositioning point.
Example:
REPOSH RMIBL DISR=20 F400
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Path traversing behavior
. The
DISR=...
.
DISR=...
479