Siemens SINUMERIK 840D sl Programming Manual page 777

2)
3)
4)
5)
6)
Figure 19-1
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
P Predefined procedure (does not supply a return value)
P Program attribute
A
Program attributes are at the end of the definition line of a subprogram:
PROC <program name>(...) <program attribute>
They determine the behavior during execution of the subprogram.
Effectiveness of the operation:
m Modal
s Non-modal
Programmability in part program:
+ Programmable
- Not programmable
Programmability in synchronized actions:
+ Programmable
- Not programmable
T Programmable only in technology cycles
Reference to the document containing the detailed description of the operation:
PGsl
Programming Manual, Fundamentals
PGAsl
Programming Manual, Job Planning
BNMsl
Programming Manual Measuring Cycles
BHDsl
Operating Manual, Turning
BHFsl
Operating Manual, Milling
FB1sl ( )
Function Manual, Basic Functions (with the alphanumeric abbreviation of the
corresponding function description in brackets)
FB2sl ( )
Function Manual, Extended Functions (with the alphanumeric abbreviation of the
corresponding function description in brackets)
FB3sl ( )
Function Manual, Special Functions (with the alphanumeric abbreviation of the
corresponding function description in brackets)
FBSIsl
Function Manual, Safety Integrated
FBSY
Function Manual, Synchronized Actions
FBWsl
Function Manual, Tool Management
Default setting at beginning of program (factory settings of the control, if nothing else
programmed).
Legend for the list of operations
Tables
19.1 Operations
777