Siemens SINUMERIK 840D sl Programming Manual page 545

Keyword Coupling characteristics /
meaning
CPFMOF
Behavior of the following axis
at complete switch-off
CPFPOS + CPOF
Switch-off position of the
following axis when switching
off
CPMRESET Coupling behavior for RESET
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Syntax
CPFMOF[FAx]="<switch-off behavior>"
"<switch-off
:
behavior>"
CPOF=(FAx) CPFPOS[FAx]=<value>
CPMRESET[FAx]="<Reset behavior>"
:
"<reset behavior>"
11.6 Generic coupling (CP...)
"STOP" Stop of a following
axis/spindle.
An active overlaid motion
is also braked to standstill.
The coupling is then
opened
"CONT"
For spindles and main
traverse axes only!
The following spindle
continues to traverse at the
speed/velocity that applied
at the instant of
deactivation.
"NONE" The current state of the
coupling is retained.
"ON" When the appropriate
coupling module is
created, the coupling is
switched on. All defined
leading axis relationships
are activated. This is also
performed when all or
parts of these leading axis
relationships are active, i.e.
resynchronization is
performed even with a
completely activated
coupling.
"OF" An active overlaid motion
is also braked to standstill.
The coupling is then
deactivated. When the
relevant coupling module
was created without an
explicit definition (CPDEF),
the coupling module is
deleted. Otherwise it is
retained, i.e. it can still be
used.
Axis couplings
545