Siemens SINUMERIK 840D sl Programming Manual page 350

Transformations
6.8 Kinematic transformation
Syntax
TRACYL(d)
TRACYL(d, n)
TRACYL(d, n, k)
TRAFOOF
Meaning
TRACYL(d)
TRACYL (d, n)
d
n
k
TRAFOOF
Note
An active
channel, e.g.
350
Activate TRACYL with the first TRACYL data set and working
diameter d
Activate TRACYL with the nth TRACYL data set and working
diameter d
Reference or working diameter
The value must be greater than 1.
TRACYL data set number (optional)
Range of values:
The parameter is only relevant for transformation type 514:
 k = 0: without groove side correction
 k = 0: with groove side correction
If the parameter is not specified, then the basic position
parameterized in machine data TRACYL_DEFAULT_MODE_<t>
applies. (optional).
Deactivate transformation
transformation is deactivated if another transformation is active in the
TRACYL
, ,
TRANSMIT TRAANG TRAORI
1, 2
.
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning