Check For Presence Of Curve Table (Ctabexists); Delete Curve Tables (Ctabdel) - Siemens SINUMERIK 840D sl Programming Manual

11.2.2

Check for presence of curve table (CTABEXISTS)

Function
The
the NC memory.
Syntax
CTABEXISTS(<n>)
Meaning
CTABEXISTS
<n>
11.2.3

Delete curve tables (CTABDEL)

Function
CTABDEL
Note
Curve tables that are active in an axis coupling cannot be deleted.
Syntax
CTABDEL(<n>)
CTABDEL(<n>,<m>)
CTABDEL(<n>,<m>,<memory location>)
CTABDEL()
CTABDEL(,,<memory location>)
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
command can be used to check if a specific curve table number is present in
CTABEXISTS
Checks for the presence of curve table number
dynamic NC memory.
0 Table does not exist
1 Table exists
Number (ID) of curve table
can be used to delete curve tables.
Axis couplings
11.2 Curve tables (CTAB)
in the static or
<n>
507