Siemens SINUMERIK 840D sl Programming Manual page 361

Job planning

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Program code

N40 TRAANG (45.0)

N50 G7 X40 Z70 F4000

N60 G5 X40 F100

Job Planning

Programming Manual, 03/2013, 6FC5398-2BP40-3BA1

Parallel to the Z axis, at a distance from the actual position of the X axis

Parallel to the inclined axis through the programmed end position

Starting position

Plunge-cutting: Starting position,

Plunge-cutting: End position

Geometry axis

Machine axis

Select XZ plane

1. Activate TRAANG transformation, angle = 45°

Calculate the starting position and approach

Traverse inclined axis to the end position

Transformations

6.8 Kinematic transformation

Sinumerik 828d Sinumerik 840de sl