Siemens SINUMERIK 840D sl Programming Manual page 216

File and Program Management
2.2 Working memory (CHANDATA, COMPLETE, INITIAL)
Save initialization program (COMPLETE, INITIAL)
The files of the working memory can be saved on an external PC and then read in again
from there.
● The files are saved with
●
Read-in initialization program
NOTICE
Data loss
If the file is read-in with the name "INITIAL_INI", then all data that is not supplied in the file
is initialized using standard data. Only machine data is an exception. This means that
setting data, tool data, ZO, GUD values, ... are supplied with standard data (normally
"ZERO").
For example, the file COMPLETE_TEA_INI is suitable for reading-in individual machine data.
The control only expects machine data in this file. This is the reason that the other data
areas remain unaffected in this case.
Loading initialization programs
The INI programs can also be selected and called as part programs if they only use data of
one channel. This means that it is also possible to initialize program-controlled data.
216
is used to create an INI file (_N_INITIAL_INI) over all areas.
INITIAL
.
COMPLETE
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning