Siemens SINUMERIK 840D sl Programming Manual page 599

Syntax
MMC(<command>,<acknowledgement mode>)
Meaning
MMC
<command>
<acknowledgement mode>
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
:
:
: Parameters of the type CHAR
16.7 Interactively call the window from the part program (MMC)
Subprogram identifier
Parameter of the STRING type
Contains the MMC command, e.g. in the following form:
"CYCLES,PICTURE_ON,T_SK.COM,PICTURE,MGUD.DEF,PICTURE_3.AWB,T
EST_1,A1"
: Operating area in which the configured user
CYCLES
dialog boxes are implemented.
PICTURE_ON Command: Display selection or display
or
deselection.
:
PICTURE_OFF
: Com file: Name of the dialog display file (user
T_SK.COM
cycles). The dialog display design is defined
here. The dialog screen is used to display user
variables and/or comment texts.
: Name of dialog display: The individual displays
PICTURE
are selected via the names of the dialog
displays.
: User data definition file, which is addressed
MGUD.DEF
while reading/writing variables.
: Graphics file
PICTURE_3.AWB
: Display time or acknowledgement variable.
TEST_1
: Text variables...",
A1
Value: : Without acknowledgement
"N"
Program execution is continued when the
command has been transmitted. The sender
is not informed if the command cannot be
executed successfully.
: Synchronous acknowledgement
"S"
The program execution is paused until the
receiving component acknowledges the
command. If the acknowledgement is
positive, the next command is executed. If
the acknowledgement is negative, an error
message is output.
Additional functions
599