Deleting The Definition Of An Electronic Gear (Egdel); Rotational Feedrate (G95) / Electronic Gear (Fpr) - Siemens SINUMERIK 840D sl Programming Manual

Axis couplings
11.4 Electronic gear (EG)
11.4.4

Deleting the definition of an electronic gear (EGDEL)

Function
An EG axis group must be switched-out before its definition can be deleted.
Programming
Syntax
EGDEL(following axis)
11.4.5

Rotational feedrate (G95) / electronic gear (FPR)

Function
The
which determines the revolutional feedrate. Please note the following with respect to this
command:
● The feedrate is determined by the setpoint velocity of the following axis of the electronic
● The setpoint velocity is calculated from the speeds of the leading spindles and modulo
● Speed parts of linear or non-modulo leading axes and overlaid movement of the following
530
command can be used to specify the following axis of an electronic gear as the axis,
FPR
gear.
axes (which are not path axes) and from their associated coupling factors.
axis are not taken into account.
Meaning
The coupling definition of the axis group is deleted. Additional
axis groups can be defined by means of
maximum number of simultaneously activated axis groups is
reached. This call triggers a preprocessing stop.
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
until the
EGDEF
Job Planning