Protection zones
3.1
Defining the protection zones (CPROTDEF, NPROTDEF)
Function
You can use protection zones to protect various elements on the machine, their components
and the workpiece against incorrect movements.
Tool-oriented protection zones:
For parts that belong to the tool (e.g. tool, toolholder)
Workpiece-oriented protection zones:
For parts that belong to the workpiece (e.g. parts of the workpiece, clamping table, clamping
shoe, spindle chuck, tailstock).
Syntax
DEF INT NOT_USED
G17/G18/G19
CPROTDEF/NPROTDEF(<n>,<t>,<applim>,<applus>,<appminus>)
G0/G1/... X/Y/Z...
...
EXECUTE(NOT_USED)
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
3
217