Deactivate Contour Preparation (Execute) - Siemens SINUMERIK 840D sl Programming Manual

User stock removal programs

17.7 Deactivate contour preparation (EXECUTE)

17.7 Deactivate contour preparation (EXECUTE)
Function
The command
the system returns to the normal execution mode.
Syntax
EXECUTE(<ERROR>)
Meaning
EXECUTE
<FAULT>
Example
Program code
...
N30 CONTPRON(...)
N40 G1 X... Z...
...
N100 EXECUTE(...)
...
640
is used to deactivate the contour preparation and at the same time
EXECUTE
Command to terminate contour preparation
Variable for the fault feedback signal
Type: INT
The value of the variable indicates whether the contour was able to be
prepared error-free:
0 Error
1 No error
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning