Block Change Behavior With Active Coupling (Cpbc) - Siemens SINUMERIK 840D sl Programming Manual

Path traversing behavior

10.13 Block change behavior with active coupling (CPBC)

10.13 Block change behavior with active coupling (CPBC)
Function
The
change can be executed in the part program with active coupling.
Syntax
CPBC[<following axis>] = <criterion>
Meaning
CPBC
<following axis>
<criterion>
Example
Program code
; Block change takes place with:
; - Coupling to following axis X2 == active
; - Setpoint synchronism == active
CPBC[X2]="IPOSTOP"
494
command specifies the block change criterion that must be satisfied so that a block
CPBC
:
:
:
Block change criterion with active coupling
Axis identifier of the following axis
Block change criterion
Type: STRING
Value Meaning: Block change is performed
"NOC" Irrespective of the coupling status
"IPOSTOP" For setpoint synchronism
"COARSE" For actual value synchronism "coarse"
"FINE" For actual value synchronism "fine"
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning