Siemens SINUMERIK 840D sl Programming Manual page 826

Glossary
Path velocity
The maximum programmable path velocity depends on the input resolution. For example,
with a resolution of 0.1 mm the maximum programmable path velocity is 1000 m/min.
PCIN data transfer program
PCIN is an auxiliary program for sending and receiving CNC user data (e.g. part programs,
tool offsets, etc.) via a serial interface. The PCIN program can run in MS-DOS on standard
industrial PCs.
Peripheral module
I/O modules represent the link between the CPU and the process.
I/O modules are:
● → Digital input/output modules
● → Analog input/output modules
● → Simulator modules
PLC
Programmable Logic Controller: → Programmable logic controller. Component of → NC:
Programmable control for processing the control logic of the machine tool.
PLC program memory
SINUMERIK 840D sl: The PLC user program, the user data and the basic PLC program are
stored together in the PLC user memory.
PLC programming
The PLC is programmed using the STEP 7 software. The STEP 7 programming software is
based on the WINDOWS standard operating system and contains the STEP 5 programming
functions with innovative enhancements.
Polar coordinates
A coordinate system which defines the position of a point on a plane in terms of its distance
from the origin and the angle formed by the radius vector with a defined axis.
Polynomial interpolation
Polynomial interpolation enables a wide variety of curve characteristics to be generated,
such as straight line, parabolic, exponential functions (SINUMERIK 840D sl).
826
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning