Siemens SINUMERIK 840D sl Programming Manual page 663

No. Param Param
mask internal
3 SC _SDIS
Z1 _DP
4
5 L _LENG
6 W _WID
7 RP _CRAD
8 X0 _PA
9 YO _PO
α0 _STA
10
DZ _MID
11
12 UXY _FAL
13 UZ _FALD
14 F _FFP1
15 FZ _FFD
_CDIR
16
17 _VARI
18 DXY _MIDA
L1 _AP1
19
W1 _AP2
20
21 AZ _AD
22 ER _RAD1
EW
23 EP _DP1
_UMODE
24
25 FS _FS
26 ZFS _ZFS
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Explanation
Safety clearance (to be added to reference point, enter without sign)
Pocket depth (abs/inc), see _AMODE)
Pocket length (inc, to be entered with sign)
Pocket width (inc, to be entered with sign)
Corner radius of pocket
Reference point, 1st axis (abs)
Reference point, 2nd axis (abs)
Angle of rotation, angle between longitudinal axis (L) and 1st axis
Maximum depth infeed
Finishing allowance, plane
Finishing allowance, depth
Feedrate in the plane
Depth infeed rate
Milling direction:
0 = Down-cut
1 = Up-cut
Machining type
UNITS:
1 = Roughing
2 = Finishing
4 = Finishing of edge
5 = Chamfer
TENS:
0 = Predrilled, infeed with G0
1 = Vertically, infeed with G1
2 = Helically
3 = Oscillation along the pocket longitudinal axis
HUNDREDS: Reserved
Maximum plane infeed, for unit, see _AMODE
Length of premachining (inc)
Width of premachining (inc)
Depth of premachining (inc)
Radius of helical path on helical insertion
Maximum insertion angle for oscillation
Helical pitch on helical insertion
Reserved
Chamfer width (inc)
Insertion depth (tool tip) on chamfering (abs/inc), see _AMODE
Programming cycles externally
18.1 Technology cycles
663