Factory-Installed Options; Factory- Or User-Installed Options - Comtech EF Data SLM-3650 Installation And Operation Manual

SLM-3650 Satellite Modem
Introduction
Notes:
1. The basic modem is shipped with either Sequential or Viterbi decoder.
2. The overhead interface card and a compatible relay adapter card (connector
personality card) are required for this option. Refer to Chapter 1 for the
applicable part numbers.
3. Requires Eurocom Interface module.
4. Requires G.703 Interface module and Overhead Interface (OH) card.
5. Either Simplex Reed-Solomon or Turbo Codec is installed, but not both.
6. Duplex Reed-Solomon and Turbo can be installed together; however, only one
can be used at a time.
1.2.2

Factory-Installed Options

Consult a Comtech EF Data Customer Support representative for modem options. The
following options are installed at the factory:
•
Output Impedance: 75Ω (50Ω
•
High Stability Reference Oscillator
•
High-power version (+5 to -20 dBm)
1.2.3

Factory- or User-Installed Options

Consult a Comtech EF Data Customer Support representative for modem options. The
following options can be factory- or user-installed:
INTELSAT/Closed Network TX or RX Reed-Solomon
Overhead (G.703/IBS/IDR/ASYNC/AUPC/D&I)
MUX:
♦ 4-Channel (SYNC)
♦ 8-Channel (SYNC)
♦ 4-Channel (ASYNC)
♦ 8-Channel (ASYNC)
♦ 4-Channel (ASYNC/SYNC)
♦ 8-Channel (ASYNC/SYNC)
Flex MUX
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Optional)
1–8
Revision 3
MN/SLM3650.IOM