Comtech EF Data SLM-3650 Installation And Operation Manual page 154

Satellite modem
Table of Contents

Advertisement

SLM-3650 Satellite Modem
Operation
LOCAL MODEM AUPC
Configures the modem for the self-monitoring Local Modem AUPC mode and for local TX power control
(self-monitoring) due to severe rain fade.
Notes:
Refer to Appendix A for more information.
MODEM SERIAL #
(Status Only).
Displays the modem serial number.
CARD #1 SERIAL #
(Status Only.)
Displays the first daughter card serial number.
CARD #2 SERIAL #
(Status Only.)
Note: Not applicable for Turbo mode.
Displays the second daughter card serial number.
CARD #3 SERIAL #
(Status Only.)
Notes:
CONFIGURATION
Comtech EF Data-supplied code.
CODE - MODE
On entry, the current configuration code is displayed with the flashing cursor on the first character. Press
[←] or [→] to move the flashing cursor. Press [↑] or [↓] to increment or decrement the digit at the flashing
cursor. Press [ENTER] to execute the change.
Entering this code enables the corresponding modem option. To purchase an option, contact a Comtech EF
Data sales representative for more information.
CONFIGURATION
Provides the means to enter modem-specific code necessary to access certain options. Refer to
CODE – CARD #1
Appendix A for more information.
Note: Displays only when daughter card is installed.
CONFIGURATION
Provides the means to enter modem-specific code necessary to access certain options. Refer to
CODE – CARD #2
Appendix A for more information.
Notes:
CONFIGURATION
Provides the means to enter modem-specific code necessary to access certain options. Refer to
CODE – CARD #3
Appendix A for more information.
Notes:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1.
The self-monitoring Local Modem AUPC mode is not used when the ASYNC/AUPC
interface option is installed.
2.
OFF with TX or RX ASYNC overhead.
1.
Not applicable for Turbo mode.
2.
Displays the third daughter card serial number.
1.
Not applicable for Turbo mode.
2.
Displays only when second daughter card is installed.
1.
Not applicable for Turbo mode.
2.
Displays only when third daughter card is installed.
3–74
Revision 3
MN/SLM3650.IOM

Advertisement

Table of Contents
loading

Table of Contents