Table A-9. Local Eia-485 (4-Wire) To Remote Eia-485 (4-Wire - Comtech EF Data SLM-3650 Installation And Operation Manual

SLM-3650 Satellite Modem
Options
A.1.4.5.5 Configuration #5 (Local EIA-485 [4-Wire] to Remote
EIA-485 [4-Wire])

Table A-9. Local EIA-485 (4-Wire) to Remote EIA-485 (4-Wire)

#5. Local End Modem Settings for EIA-485 (4-Wire)
Utility: Interface Menu
ASYNC TX and RX Type
Configuration: Interface Menu
ASYNC TX and RX Baud Rate
ASYNC TX and RX Length
ASYNC TX and RX Parity
ASYNC TX Stop
#5. Remote End Modem Settings for EIA-485 (4-Wire)
Utility: Interface Menu
ASYNC TX and RX Type
Configuration: Interface Menu
ASYNC TX and RX Baud Rate
ASYNC TX and RX Length
ASYNC TX and RX Parity
ASYNC TX Stop
Utility: System Menu
Remote Baud Rate
Parity
Address
The local end cable connects the 25-pin female ASYNC connector (on either the
breakout panel or the Y cable) to the EIA-485 (4-wire) remote terminal (WYSE or laptop
computer). The pinout of the local cable is listed in the following table.
The remote end cable connects the 25-pin female ASYNC connector (on either the
breakout panel or the Y cable) to the 9-pin female connector, J6, at the rear of the
modem. The pinout of the remote cable is listed in the following table.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EIA-485 (4-wire)
150 to 38400
7 bits
Even
2 bits
EIA-485 (4-wire)
150 to 38400
7 bits
Even
2 bits
Equal to ASYNC TX and RX baud rate
Even
1 to 255
#5. Local End EIA-485 (4-Wire) Twisted Pair
9-Pin
Female Connector
TX+ 4 14
TX- 5 2
RX+ 8 16
RX- 9 3
#5. Remote End EIA-485 (4-Wire)Twisted Pair
9-Pin
Male Connector
TX+ 4 16
TX- 5 3
RX+ 8 14
RX- 9 2
A–35
(See A.1.4.3.10)
(See A.1.4.3.10)
25-Pin
Male Connector
TX+
TX-
RX+
RX-
25-Pin
Male Connector
RX+
RX-
TX+
TX-
Revision 3
MN/SLM3650.IOM