Table of Contents
Advertisement
SLM-3650 Satellite Modem
Operation
RX DATA FAULT
TX 2047 PATTERN
(Test Mode Configuration)
RX 2047 PATTERN
(Test Mode Configuration)
TX CODING FORMAT
RX CODING FORMAT
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Receive data fault. Selects a receive interface fault monitor of NONE, AIS, or DATA.
The data monitored for RX data is coming from the satellite. Refer to TX DATA FAULT for a
description of function choices.
Upon entry, the current, monitored RX DATA FAULT is displayed. Press [↑] or [↓] to make the
selection. Press [ENTER] to execute the change.
Conditional: This menu is only available when the overhead interface PCB is installed.
Programs the transmitter to ON or OFF to insert a 2047 pattern instead of the normal transmit
data.
Upon entry, the current status is displayed. Press [↑] or [↓] to make the selection. Press
[ENTER] to execute the change.
Conditional: This menu is only available when the overhead interface PCB is installed.
Programs the modem to receive a 2047 pattern as the normal receive data, and allows the
BER monitor to work on that 2047 pattern.
Upon entry, the current status is displayed. Press [↑] or [↓] to select on or off. Press [ENTER]
to execute the change.
Conditional: This menu is only available when the overhead interface PCB is installed.
Programs the transmitter for AMI, B8ZS, or HDB3 coding of the baseband data.
Upon entry, the current coding format is displayed. Press [↑] or [↓] to make the selection.
Press [ENTER] to execute the change.
Conditional: This menu is only available when the TX G.703 interface is programmed. This
requires that the optional Overhead Card is installed.
Programs the receiver for AMI, B8ZS, or HDB3 coding.
Upon entry, the current coding format is displayed. Press [↑] or [↓] to make the selection.
Press [ENTER] to execute the change.
Conditional: This menu is only available when the RX G.703 interface is programmed. This
requires that the optional Overhead Card is installed.
3–21
Revision 3
MN/SLM3650.IOM
Advertisement
Table of Contents
