Table of Contents
Advertisement
SLM-3650 Satellite Modem
Operation
TX CHAN # 4 DR
TX CHAN # 4 PHASE
RX CHAN # 1 MODE
RX CHAN # 1 DR
RX CHAN # 2 MODE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Programs the TX Channel # 4 DR.
0.6 to 64 kbps
Note: Not displayed if AUPC or Disabled is selected.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the selected
kbps. Press [ENTER] to execute the change.
Programs the TX # 4 PHASE.
NRM or INV
Note: Not displayed if AUPC or Disabled is selected.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the selected
kbps. Press [ENTER] to execute the change.
Programs the RX Channel # 1 MODE.
D&I Enabled
T1/E1 Enabled
Disabled
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the selected
kbps. Press [ENTER] to execute the change.
Programs the RX Channel # 1 DR.
TX Channel 1 Data Rates:
1544 kbps or 2048 kbps for bypass
N * 64.0 kbps for D&I
Note: Not displayed if Disabled is selected.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the selected
kbps. Press [ENTER] to execute the change.
Programs the RX Channel # 2 MODE.
ADPCM Enabled
ADPCM Disabled
Note: Allows ADPCM 32 kbps operational.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the selected
kbps. Press [ENTER] to execute the change.
3–34
Revision 3
MN/SLM3650.IOM
Advertisement
Table of Contents
