Table of Contents
Advertisement
SLM-3650 Satellite Modem
Operation
DROP CHANNEL
ASSIGNMENTS
INSERT CHANNEL
ASSIGNMENTS
ASYNC TX BAUD
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Programs the drop channels into the following desired time slot:
•
DROP SAT CHANNEL TERR
(For T1, T1_ESF, T1_S, T1_ESF_S)
•
DROP SAT T-SLOT TERR
(For all other formats)
Upon entry, drop channel 1 and the current time slot are displayed. Press [↑] or [↓] to select
the drop channel to be programmed.
Press [ENTER] to begin programming. Press [↑] or [↓] to select the time slot for each available
drop channel by incrementing or decrementing the digit at the flashing cursor. Press [ENTER]
to execute the change.
Conditional: This menu is only available when the optional D&I has been selected for Modem
Type in the Function Select: Utility menu and the Overhead card is installed.
Programs the satellite channels into the following desired terrestrial frame slot:
•
INSERT SAT CHANNEL TERR
(For T1, T1_ESF, T1_S, T1_ESF_S)
•
INSERT SAT T-SLOT TERR
(For all other formats)
Upon entry, satellite channel 1 and the current terrestrial frame slot are displayed. Press [↑] or
[↓] to select the satellite channel to be programmed. Press [ENTER] to choose the satellite
channel to be programmed. Press [↑] or [↓] to select the terrestrial frame slot for each
available satellite channel by incrementing or decrementing the digit at the flashing cursor. If a
time slot is unused, select NI (Not Inserted). Press [ENTER] to execute the change.
Conditional: This menu is only available when the optional D&I has been selected for Modem
Type in the Function Select: Utility menu and the Overhead card is installed.
Programs the ASYNC overhead transmit baud rate for 110 to 38400 bit/s.
Upon entry, the current status of the ASYNC TX baud rate is displayed. Press [↑] or [↓] to
select one of the following baud rates (bit/s): 110, 150, 300, 600, 1200, 2400, 4800, 9600,
19200, 38400.
Press [ENTER] to execute the change.
Conditional: The menu is only available when the Function Select: Utility: Modem Type =
ASYNC and requires that the Overhead Card is installed.
3–23
Revision 3
MN/SLM3650.IOM
Advertisement
Table of Contents
