Table of Contents
Advertisement
SLM-3650 Satellite Modem
Operation
RS DECODER
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Conditional: If none of the proper overhead types or data rates apply, the Reed-Solomon
decoder in the ON state will be rejected (double beep). With the Reed-Solomon decoder turned
ON (not OFF or Correction OFF), the corrected BER will be reported from the outer decoder
(Reed-Solomon decoder).
Programs the Reed-Solomon decoder ON, Correction OFF, or OFF.
Upon entry, the current status of the Reed-Solomon decoder is displayed. Use [↑] or [↓] to select
one of the following modes:
ON: Enables the Reed-Solomon decoder to provide data error corrections.
CORRECTION_OFF: Turns off the Reed-Solomon decoder data error correction circuitry. Data
flow is then routed through normal data paths without error corrections.
OFF: The RS decoder is normally disabled (OFF position). To execute any of the Reed-Solomon
decoder modes, enter the desired Reed-Solomon decoder and select the desired mode.
Press [ENTER] to execute the change.
3–15
Revision 3
MN/SLM3650.IOM
Advertisement
Table of Contents
