Dmd1050Ts Configurations; Features/Options Installed At Time Of Order; Feature Upgrades; Function Accessibility - Comtech EF Data DMD1050TS Installation And Operation Manual

Additional options and configuration, such as Monitor and Control (M&C), can be activated in
seconds via the Web Browser.
Compatibility is maintained with other modems, such as the DMD2050E, SLM-5650A,
DMD1050T, DMD2050, DMD50, DMD20 and the DISA-certified, MIL-188-165 compliant
DMD15L, for seamless substitution and addition to existing systems. Compatibility with the Viasat
MD1366 EBEM modem is also provided.
The DMD1050TS offers built in standard interfaces that are selectable from MIL-188-114A and a
Dual Port Ethernet Bridge.
1.2

DMD1050TS Configurations

You can configure the DMD1050TS in different ways:
•
Features and options installed when the unit is ordered
•

Feature upgrades

•
Hardware options you can install at your location
•
Options installed in a unit at a Comtech EF Data Service Center

1.2.1 Features/Options Installed at Time of Order

Features installed when the unit is ordered consist of options pre-installed/initialized in the factory
before shipment. You can see these from the web browser.
Factory installed options are chassis and board configurations that occur during manufacture.
1.2.2 Feature Upgrades
Feature upgrades are an easy way of changing the feature set for an installed modem. Feature
upgrades are how most options are implemented.
Purchase feature upgrades any time by contacting Comtech EF Data.
1.3

Function Accessibility

With a terminal or personal computer and a serial link, you have access to all functions for remote
monitoring and control.
Introduction
DMD1050TS Satellite Modem Board
1–2
Revision 1
MN-DMD1050TS