Table of Contents
Advertisement
SLM-3650 Satellite Modem
Theory of Operation
A backward alarm being received on a particular link is detected by one of the two
following methods:
•
The backward alarm output drives a FORM C relay with all three contacts
available on the data connector.
•
The status of all transmit and receive backward alarms may be read through the
EIA-232 or EIA-485 remote interface connector that is integrating a modem or
switch into a computer network.
Refer to Appendix B for the remote interface specification.
In addition to the four backward alarms for IDR and two backward alarms (primary and
secondary) for IBS, all modes support the following faults:
•
MOD (modulator equipment)
•
DEM (demodulator equipment)
•
CEQ (common equipment)
Each fault is indicated by a FORM C relay contact and an open collector output.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4–27
Revision 3
MN/SLM3650.IOM
Advertisement
Table of Contents
