Software Libraries; Configure The Device Using Xctu; Over-The-Air (Ota) Firmware Update - Digi DigiMesh XBee S2C User Manual

Configure the XBee/XBee-PRO S2C DigiMesh 2.4 RF Module

Software libraries

One way to communicate with the XBee/XBee-PRO S2C DigiMesh 2.4 RF Module is by using a software
library. The libraries available for use with the XBee/XBee-PRO S2C DigiMesh 2.4 RF Module include:
XBee Java library
n
XBee Python library
n
XBee ANSI C library
n
XBee mbed library
n
The XBee Java Library is a Java API. The package includes the XBee library, its source code and a
collection of samples that help you develop Java applications to communicate with your XBee devices.
The XBee Python Library is a Python API that dramatically reduces the time to market of XBee
projects developed in Python and facilitates the development of these types of applications, making it
an easy process.
The XBee ANSI C Library project is a collection of portable ANSI C code for communicating with the
devices in API mode.
The XBee mbed library is a ready-to-import mbed extension that dramatically reduces development
time for XBee projects on mbed platforms.

Configure the device using XCTU

XBee Configuration and Test Utility (XCTU) is a multi-platform program that enables users to interact
with Digi radio frequency (RF) devices through a graphical interface. The application includes built-in
tools that make it easy to set up, configure, and test Digi RF devices.
For full support of the XBee/XBee-PRO S2C DigiMesh 2.4 RF Module, you must use XCTU version 6.3.2
or higher.
For instructions on downloading and using XCTU, see

Over-the-air (OTA) firmware update

The XBee/XBee-PRO S2C DigiMesh 2.4 RF Module supports OTA firmware updates using XCTU version
6.3.2 or higher. For instructions on performing an OTA firmware update with XCTU, see
the firmware of your modules
XBee S2C DigiMesh 2.4 User Guide
the XCTU User
in the XCTU User Guide.
Software libraries
Guide.
How to update
32