Exemption Of Liability; Laser Safety Notices - Leuze electronic ODS 10 Manual

Prerequisites for competent persons:
• ≤hey have a suitable technical education.
• ≤hey are familiar with the rules and regulations for occupational safety and safety at work.
• ≤hey are familiar with the original operating instructions of the device.
• ≤hey have been instructed by the responsible person on the mounting and operation of the device.
Certified electricians
Electrical work must be carried out by a certified electrician.
Due to their technical training, knowledge and experience as well as their familiarity with relevant stan-
dards and regulations, certified electricians are able to perform work on electrical systems and indepen-
dently detect possible dangers.
In Germany, certified electricians must fulfill the requirements of accident-prevention regulations BGV A3
(e.g. electrician foreman). In other countries, there are respective regulations that must be observed.
2.4

Exemption of liability

Leuze electronic GmbH + Co. KG is not liable in the following cases:
• ≤he device is not being used properly.
• Reasonably foreseeable misuse is not taken into account.
• Mounting and electrical connection are not properly performed.
• Changes (e.g., constructional) are made to the device.
2.5

Laser safety notices

A≤≤EN≤ION, LASER RADIA≤ION – LASER CLASS 1
≤he device fulfills the IEC 60825-1:2007 (EN 60825-1:2007) requirements for a product in laser class 1
as well as the ≥.S. 21 CFR 1040.10 regulations with deviations corresponding to Laser Notice No. 50
from June 24th, 2007.
 Observe the applicable statutory and local laser protection regulations.
 ≤he device must not be tampered with and must not be changed in any way.
≤here are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
Leuze electronic ODS 10
Safety
8