Commands - Siemens SIMATIC RF650R Configuration Manual

Parameter
EXT_UHF
LEN_ID
MEM_BANK
PSWD
EDIT_BLACKLIST_MODE
INVENTORY_DURATION
INVENTORY_DUR_UNIT
LOCK-TAG-
BANK_ACTION
LOCK-TAG-BANK_MASK
9.6.4

Commands

The structure of the commands with Rockwell controllers is identical to the structure with S7
controllers. You will find a description of the commands in the section "Commands
(Page 142)".
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
Data type Default val-
ue
STRUCT --
SINT 0
SINT 3
DINT 0
SINT 0
DINT 0
DINT 0
DINT 0
DINT 0
Programming via Rockwell controller
9.6 Programming the Ident profile
Description
Structure for additional parameters (RF680R/RF685R
only)
Length of the valid data in the "EPCID_UID" field.
Memory bank on the transponder
0x00 = RESERVED
•
0x01 = EPC
•
0x02 = TID
•
0x03 = USER
•
Password for transponder access
0x00 ≙ no password
Mode
0x00 = add EPC-ID
•
0x01 = add all "Observed" transponders
•
0x02 = delete EPC-ID
•
0x03 = delete all
•
Duration
Period of time or number of inventories or number of
"Observed" events
Example:
0x00 ≙ no inventory
•
0x01 ≙ one inventory
•
Unit for "DURATION"
0x00 = time [ms]
•
0x01 = inventories
•
0x02 = number of "Observed" events
•
Lock-Action (see "EPC Specification")
Lock-Mask (see "EPC Specification")
183