Rssieventreport - Siemens SIMATIC RF650R Configuration Manual

Programming via XML interface
10.4 XML EventReports
Parameter
value_dataLength
value_data
10.4.1.2

rssiEventReport

An RSSI event report signals a change in the RSSI values when reading the transponders.
RSSI events are generated separately for each antenna.
The data type and amount are specified by the settings in the basic configuration in the
WBM.
Report
<frame>
<report>
270
Type
Decimal value
0...9
Hexadecimal
value
0...9, A...F
<id> value_id </id>
<rssier>
<tag>
<sourceName> value_sourceName </sourceName>
<tag>
<tagID> value_tagID </tagID>
<tagPC> value_tagPC </tagPC>
<utcTime> value_utcTime </utcTime>
<antennaName> value_antennaName </antennaName>
<rSSI> value_rSSI </rSSI>
<channel> value_channel </channel>
<power> value_power </power>
<polarization> value_polarization </polarization> // opt
</tag>
...
<tag> // opt
...
</tag> // opt
</rssier>
Values Description
1...510 Number of bytes to be read.
-- Data that should be read. Each byte is
represented by two hexadecimal char-
acters.
Example:
The byte sequence "0x12, 0x34, 0xA3"
is represented as the character string
"1234A3" in the "value_data" parame-
ter.
"value_dataLength" is 3 in this exam-
ple.
If the transponder is identified but the
data cannot be read (e.g. if the tran-
sponder has no user memory as re-
quired), this field remains empty.
"value_success" is then set to "False".
Configuration Manual, 03/2018, C79000-G8976-C386-06
// opt
// opt
// opt
// opt
// opt
// opt
SIMATIC RF650R/RF680R/RF685R