Siemens SIMATIC RF650R Configuration Manual page 138

Programming via SIMATIC controller
8.6 Programming the Ident profile
Figure 8-19 The input parameters of the Ident profile
Note
Working with multiple channels
If you work with several channels, you must ensure that for each channel, the block is called
with a separate instance DB.
You will find more information on Ident profile in the manual "Ident profile and Ident blocks
(https://support.industry.siemens.com/cs/ww/en/view/106368029)".
138
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06