Getreaderstatus - Siemens SIMATIC RF650R Configuration Manual

10.3.2.14

getReaderStatus

This command requests status information from the reader.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
// opt → Optional: Line can be omitted.
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 263)".
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
<id> value_id </id>
<getReaderStatus/>
<id> value_id </id>
<resultCode> 0 </resultCode>
<getReaderStatus>
<returnValue>
<readerType> value_readerType </readerType>
<mLFB> value_mLFB </mLFB>
<hWVersion> value_hWVersion </hWVersion>
<fWVersion> value_fWVersion </fWVersion>
<subVersions>
<version> value_version </version>
...
</subVersion>
</returnValue>
</getReaderStatus>
Programming via XML interface
10.3 XML commands
// opt
// opt
217