Siemens SIMATIC RF650R Configuration Manual page 219

Reply
<frame>
<reply>
</reply>
</frame>
// opt → Optional: Line can be omitted.
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 263)".
Parameter
Parameter
value_id
value_
sourceName
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
<id> value_id </id>
<resultCode> 0 </resultCode>
<getAllSources>
<returnValue>
<sourceName> value_sourceName </sourceName>
...
<sourceName> value_sourceName </sourceName>
</returnValue>
</getAllSources>
Type
Decimal value
0...9
Text
Values Description
0...4294967295 Unique command identifier
-- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 54)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Programming via XML interface
10.3 XML commands
// opt
219