Siemens SIMATIC RF650R Configuration Manual page 265

Result code
hex
0x43
0x46
0xC1
0xCA
0xCB
0x61
0x63
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
0xE8
0xE9
0xEA
0xEB
0xFA7 4007
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
Name
dec
67 ERROR_ANTENNA
70 ERROR_INVALID_READER_
STATUS
193 ERROR_TAGFIELD_NOT_FOUND
202 ERROR_MISCELLANEOUS
203 ERROR_CONFIGURATION
97 ERROR_COMMAND_NOT_
SUPPORTED
99 ERROR_PARAMETER_INVALID_
VALUE
225 ERROR_PARAMETER_MISSING
226 ERROR_PARAMETER_INVALID_
FORMAT
227 ERROR_PARAMETER_INVALID_
TYPE
228 ERROR_PARAMETER_NOT_
SUPPORTED
229 ERROR_WRONG_MESSAGE_
FORMAT
230 ERROR_INVENTORY_COMMAND_
FAILED
231 ERROR_READ_COMMAND_
FAILED
232 ERROR_WRITE_COMMAND_
FAILED
233 ERROR_WRITETAGID_COMMAND_
FAILED
234 ERROR_LOCK_COMMAND_
FAILED
235 ERROR_KILL_COMMAND_
FAILED
ERROR_READPOINT_NOT_FOUND
Programming via XML interface
10.4 XML EventReports
Description
An antenna error was detected during
command execution.
You can find additional information on an-
tenna errors and possible solutions in the
section "XML/PLC error messages
(Page 290)".
The specified command is not permitted in
the current reader status.
The specified tag field is unknown.
A general error has occurred.
A configuration error has occurred.
The command is not supported by the
reader or is unknown.
A parameter has an invalid value.
A necessary parameter has not been speci-
fied.
A parameter has an incorrect format
A parameter has the wrong format or the
wrong data type.
A parameter is not supported by this reader.
The XML format is incorrect. An error was
detected when parsing the command.
The inventory command failed.
The read command failed.
The write command failed.
Writing the EPC-ID failed.
The Lock command failed.
The Kill command failed.
The specified read point is inactive because
it was not assigned to any antenna.
265