Diagnostics Using Studio 5000 Logix Designer; Error Messages - Siemens SIMATIC RF650R Configuration Manual

Service and maintenance

12.2 Error messages

12.1.6

Diagnostics using Studio 5000 Logix Designer

This section is intended only for users of Rockwell controllers (RF680R/RF685R).
You will find information on diagnostics using the Studio 5000 Logix Designer in the Studio
5000 Logix Designer manual.
12.2 Error messages
You have the following options for error analysis of the modules:
● Via the LED status display of the reader
for RF680R/RF685R
● Via XML error messages
for RF650R/RF680R/RF685R
You will find more information on XML error messages in the section "Interrupts
(Page 274)".
● Via OPC UA error messages
for RF680R/RF685R
● using the WBM
for RF650R/RF680R/RF685R
These alternative methods are described below.
288
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06