Siemens SIMATIC RF650R Configuration Manual page 198

Programming via XML interface
10.3 XML commands
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 263)".
Parameter
Parameter
value_id
value_iPAddress
value_
subNetMask
value_gateway
value_
dHCPEnable
198
<id> value_id </id>
<resultCode> 0 </resultCode>
<getIPConfig>
<iPAddress> value_iPAddress </iPAddress>
<subNetMask> value_subNetMask </subNetMask>
<gateway> value_gateway </gateway>
<dHCPEnable> value_dHCPEnable </dHCPEnable>
<getIPConfig/>
Type
Decimal value
0...9
IP address
IP address
IP address
Fixed values
Values Description
0...4294967295 Unique command identifier
1.0.0.1... IP address of the reader
255.255.255.254
Parameter is ignored, if DHCP is acti-
vated:
value_dHCPEnable = True
1.0.0.1... Subnet mask of the reader
255.255.255.254
Parameter is ignored, if DHCP is acti-
vated:
value_dHCPEnable = True
1.0.0.1... Gateway of the reader
255.255.255.254
Parameter is ignored, if DHCP is acti-
vated:
value_dHCPEnable = True
True Use of DHCP to assign the IP address.
False
Configuration Manual, 03/2018, C79000-G8976-C386-06
SIMATIC RF650R/RF680R/RF685R