Siemens SIMATIC RF650R Configuration Manual page 271

</report>
</frame>
// opt → Optional: Depending on the parameter assignment or the amount of data, the line
can be omitted.
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 263)".
Parameter
Parameter
value_id
value_tagID
value_tagPC
value_utcTime
value_
antennaName
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
<id> value_id </id>
<resultCode> 0 </resultCode>
<rssier/>
Type
Decimal value
0...9
Hexadecimal
value
0...9, A...F
Hexadecimal
value
0...9, A...F
Time
Fixed values
Values Description
0...4294967295 Unique command identifier
-- EPC-ID in "RAW Hex Data Format".
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
-- Optional
Tag PC (Protocol Control)
16-bit value represented by four hexa-
decimal characters.
Example:
The value "1234" corresponds to the
binary value "0001.0010.0011.0100".
-- UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Antenna01 Name of the antenna
Antenna02
Antenna03
Antenna04
Programming via XML interface
10.4 XML EventReports
271