Siemens SIMATIC RF650R Configuration Manual page 275

Parameter
value_utcTime
value_errorText
Value_eventType
value_paramXY
List of possible alarm messages
Error number
hex
0x1511
0x1512
0x1513
0x1514
0x1515
0x1521
0x1522
0x1523
0x1525
0x1526
0x1527
0x1528
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
Type
Text
Text
Text
Text
Description
dec
5393 ERROR_NO_ANSWER_FROM_TAG
The transponder is not responding.
5394 ERROR_WRONG_PASSWORD
The password you entered is incorrect. Access to the transponder was denied.
5395 ERROR_VERIFY_TAG_FAILED
Verification of the transponder failed.
5396 ERROR_TAG_UNSPECIFIED
General transponder error.
5397 ERROR_TAG_INSUFFICIENT_POWER
There is not enough transponder power.
5409 ERROR_NO_TAG
There is no transponder in the antenna field.
5410 ERROR_NO_DATA
The requested data is not available.
5411 ERROR_INVALID_CRC
Bad checksum
5413 ERROR_NO_FREQUENCY
No radio channel activated.
5414 ERROR_NO_CARRIER
No carrier signal activated.
5415 ERROR_MORE_THAN_ONE_TAG_IN_FIELD
There is more than one transponder in the antenna field.
5416 ERROR_AIR_PROTOCOL_UNSPECIFIED
General radio protocol error
Values Description
-- UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
-- Message text of the alarm
Coming Status display
Going
Some alarms have a simple status
indication. This indicates whether the
error occurred and is still present or
whether it has been eliminated.
-- Additional parameter
The name of the parameter depends
on the error. Depending on the error
number, an alarm contains a different
number of parameters.
Programming via XML interface
10.4 XML EventReports
275