Commands - Siemens SIMATIC RF650R Configuration Manual

Programming via SIMATIC controller
8.6 Programming the Ident profile
8.6.4

Commands

Table 8- 22 PHYSICAL-READ
CMD OFFSET LEN_
BUFFER DATA
0x70 Offset in Length
the of re-
"RXREF" ceived
receive data
buffer
Table 8- 23 PHYSICAL-WRITE
CMD OFFSET LEN_
BUFFER DATA
0x71 Offset in Length
the of the
"TXREF" data to
send be writ-
buffer ten
Table 8- 24 READER-STATUS
CMD OFFSETBUFFER
0x74 Offset in the "RXREF"
receive buffer
142
ADR_TAG CHAINED EPCID_
Address True =
on the chained
tran-
False =
sponder
not
chained
ADR_TAG CHAINED EPCID_
Address True =
on the chained
tran-
False =
sponder
not
chained
ATTRIBUTES
Identifier of the status
mode "0x89"
LEN_ID
UID
Buffer for up to Length of
62 bytes EPC-ID the EPC-
ID (2-62
2 - 62-byte EPC-
bytes)
ID is entered at
the start of the 0x00 ≙
buffer (length is unspeci-
set by "LEN_ID") fied sin-
gle tag
Default value:
access
0x00 ≙ unspeci-
fied single tag
access
LEN_ID
UID
Buffer for up to Length of
62 bytes EPC-ID the EPC-
ID (2-62
2 - 62-byte EPC-
bytes)
ID is entered at
the start of the 0x00 ≙
buffer (length is unspeci-
set by "LEN_ID") fied sin-
gle tag
Default value:
access
0x00 ≙ unspeci-
fied single tag
access
CHAINED
True = chained
False = not chained
Configuration Manual, 03/2018, C79000-G8976-C386-06
MEM_ PSWD
BANK
Memory Pass-
bank word
0x00 ≙
0x00 ≙
•
no pass-
reserved
pass-
0x01 ≙
•
word
EPC
0x02 ≙
•
TID
0x03 ≙
•
USER
MEM_ PSWD
BANK
Memory Pass-
bank word
0x00 ≙
0x00 ≙
•
no pass-
reserved
pass-
0x01 ≙
•
word
EPC
0x02 ≙
•
TID
0x03 ≙
•
USER
IDENT_
DATA
Received status data
You will find the data struc-
ture of the status mode in the
section "Reader_Status
(Page 121)".
SIMATIC RF650R/RF680R/RF685R
IDENT_
DATA
Read data
IDENT_
DATA
Data to be
written