Chaining; Command Repetition; Digital Inputs/Outputs - Siemens SIMATIC RF650R Configuration Manual

Programming via Rockwell controller

9.7 Digital inputs/outputs

9.6.5

Chaining

The sending of chained commands with Rockwell controllers functions in exactly the same
was as with S7 controllers. You will find a description of how commands are chained in the
section "Chaining (Page 145)".
9.6.6

Command repetition

The Ident profile supports command repetition (Repeat command). Command repetition with
Rockwell controllers functions in exactly the same was as with S7 controllers. You will find a
description of command repetition in the section "Command repetition (Page 148)".
9.7 Digital inputs/outputs
The structure and the way digital inputs/outputs work with Rockwell controllers is identical to
the structure and the way they work with S7 controllers. You will find a description of digital
inputs/outputs in the section "Digital inputs/outputs (Page 153)".
184
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06