Siemens SIMATIC RF650R Configuration Manual page 261

// opt → Optional: Line can be omitted. In the reply, the parameter is transferred depending
on the configuration settings (engineering/communication).
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 263)".
Parameter
Parameter
value_id
value_
sourceName
value_tagID
value_tagPC
value_lockAction
value_lockMask
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
Type Values
Decimal value 0...4294967295
0...9
Text --
Hexadecimal --
value
0...9, A...F
Hexadecimal --
value
0...9, A...F
Boolean value 0000000000...
0, 1 1111111111
Boolean value 0000000000...
0, 1 1111111111
Programming via XML interface
10.3 XML commands
Description
Unique command identifier.
Name of the read point.
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 54)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Optional
EPC-ID in "RAW Hex Data Format".
This function applies to all transpond-
ers with this ID.
If this parameter is empty or not even
transferred, the function applies to all
transponders. Nevertheless only one
transponder is then permitted in the
antenna field.
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Optional
Tag PC (Protocol Control)
16-bit value represented by four hexa-
decimal characters.
Example:
The value "1234" corresponds to the
binary value "0001.0010.0011.0100".
"LockAction" is a 10 digit Boolean
value. The least significant bits decide
the "USER Memory".
You will find a full description of the
"LockAction" parameter in the "EPC
Global Specification".
"LockMask" is a 10 digit Boolean value.
The least significant bits decide the
"USER Memory".
You will find a full description of the
"LockMask" parameter in the "EPC
Global Specification".
261