Siemens SIMATIC RF650R Configuration Manual page 67

Tag field properties
In the "Tag field properties" area, you can adapt the parameters of the individual tag fields.
Table 7- 10
Parameter
Name
Bank
Start address
Length
Transponder memory configuration
The "Transponder memory configuration" area contains a graphic to illustrate the memory
configuration and the memory areas of a UHF transponder.
Example
The production date of a product is stored on a transponder in the USER memory area
(memory bank 3). The production date is located at address 10 and is 8 bytes long. The
corresponding tag field is created and assigned to a read point. Following this, with each
object/transponder identification (TagEvent "Observed", the production date of the object is
read out automatically and sent to the XML user application with the EPC-ID of the
transponder.
Explanation of the memory structure
The transponder memory is divided into four different memory banks.
Figure 7-9
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
Description of the parameters of the tag fields
Description
Input field for assigning a logical name/ descriptive title to the tag field.
Drop-down list for selecting the memory bank in which the memory area
is located.
Address starting at which the data will be read out/written.
Value range
Number of bytes to be read out or written starting at the start address.
Value range
Transponder memory configuration
Configuring with the WBM
7.3 The menu items of the WBM
0 ... 65535 bytes
1 ... 1024 bytes
67