Graco 25A693 Instructions Manual page 90

Using the Setup Screens
Set Up Up Notifications Notifications
Set Set Up Notifications
When an alarm or event occurs, email notifications
can be automatically sent by email or text message.
Use this procedure to enter up to ten email addresses
for up to ten users.
1. Press on any Run screen.
2. On the Setup Menu screen, press Email
3. On the Email Setup screen, press Users
Figure 78 Email Address Screen
Item Description
Item Item Description Description
User Name Optional. Enter a name to identify the person who receives emails or text messages.
Email
Enter the complete email address of the user. The address must be in a format suitable for
Address the required transport. For example, name@domain. To send a text message using email,
see Optional Text Message Using
Event Type Select the type of event that triggers an email or text message to this user:
• All Events
• Alarms Only: Events that contain xxxx-A at the end of the error code
• Alarms and Deviations: Events that contain xxxx-A or xxxx-D at the end of the error code
• Tank Events: Events that pertain to tank level error codes beginning with Lxxx
• Communication Alarms: Events that pertain to communication error codes starting with
Cxxx
Format Select the method for notifying this person:
• Email
• Text
90
4. On the Email Address screen, press the data
field for each column, then use the popup keypad
to enter information for each person to receive
Intelligent Paint Kitchen system notifications.
NOTE: Press Shift to type capital letters. The
NOTE: NOTE:
Shift key changes into a More key, which you
can press to view and type special characters
Email.
Email
(for example @ or _ symbols) that might be used
Users.
Users
in an email address.
Email.
3A4030C