Graco 25A693 Instructions Manual page 62

Using the Setup Screens
Button Button Button
Supervisor
Configuration
HMI Configuration
Email
Expansion I/O
Settings
Password
62
Description Description Description
Press to display the Supervisor Configuration screen, used to access these Intelligent
Paint Kitchen software functions:
• View the status of each Supervisor Box in the system.
• View or edit the IP address and the subnet mask, and the gateway used by the
Supervisor network.
• Ping the Supervisor network to confirm communication.
For more information, see
Press to display the Display Configuration screen, used to view or edit the
Modbus/TCP network configuration for port 1 and port 2. Follow the procedure in
Configure the Display, page
Press to display the Email Setup screen, used to specify email addresses
to which notification of system events are sent. Follow the procedure in
Set Up Notifications, page
Press to set the language, screen saver, time format, and time settings; and to access
the Utilities, Versions, and Diagnostic menus.
• Press Screen Screen Screen Saver Saver to set up the screen saver on the Touchscreen interface. Use Saver
this feature to set the inactive time after which the screen saver is displayed.
• Set the time and the date. See
Utilities to display the Utilities Menu screen, used to access these Intelligent
• Press Utilities Utilities
Paint Kitchen software functions:
– Format and use an SD card in the Touchscreen Module. See
Use an SD Card, page
– Format and use a USB drive in the Touchscreen Module. See
Use a USB Drive, page
– Test the Touchscreen interface to see if calibration is needed.
Format and use an SD card in the Touchscreen Module. See
Test the Touchscreen Interface, page
– Calibrate the Touchscreen interface.
Calibrate the Touchscreen Interface, page
• Press Versions Versions Versions to display the Versions screen, used to view the current version
numbers of the software used by the Intelligent Paint Kitchen, the Pump
Control Modules, and the Tank Control Modules. Follow the procedure in
View Software Versions, page
• Press Diagnostic to display the Diagnostic Menu screen, used to view and check
diagnostic information for a selected station.
Press to create a password to prevent unauthorized users from changing Intelligent
Paint Kitchen settings. See
password. See Enter Password, page 95
Configure the Supervisor Module, page
92.
90.
Set the Time and Date, page
135.
135.
133.
See
134.
133.
Create a Password, page 95
to access password-protected screens.
93.
136.
to set up or change the
3A4030C